Kraft Paper Production Line, Carton Paper Manufacturing Equipment Customized

• Condition: New
• Automation: Automatic
• After-sales Service: 1 Year
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: MK-EP2328
• Warranty: 1 Year
• Transport Package: Wooden Case
• Specification: Customized
• Trademark: Markevina or OEM
• Origin: China
• Production Capacity: 100, 000, 000/Year
• Package Size: 200.00cm * 300.00cm * 200.00cm
• Package Gross Weight: 200000.000kg

Product Description

Kraft Paper Production Line,  Carton Paper Manufacturing Equipment Customized
 
Production Line General Technical parameter

1,Raw material: Waste paper
2,Output paper: Kraft paper
3,Paper gsm: 80-200g/
4,Net paper width: 2500mm
5,Rail gauge: 3400mm
6,Designed speed: 230m/min
7,Working speed: 100-190m/min
8,Working face width: 3000mm
8,Capacity: 50-55T/D
9,Drive: AC Frequency conversion, section drive.
10,Arrange mode: Left hand machine or Right hand machine
11,Paper dryness of each section
Wire section drive roller: ≥20-22%          Press section output: ≥42-45%
Enter the sizing press: ≥82-85%      Drying section output: ≥90-92%         Finished paper: ≥93%
12. Horizontal shrinkage rate (average): ≤3.5~4.5%         Horizontal width moisture difference: ≤ ± 1.0%
Horizontal width quantitative difference: ≤ ± 1.5%

1. Pulp density enter to paper machine: 0.3~0.8%
2. Glue main ingredients: Neutral corn starch, Gluing weight: 2-3gram/ (single surface), Glue density: 8-10%.
3. Fresh water and recycled use water condition:

Fresh water condition: Clean, no color, low sand, PH value: 6~8
Fresh water pressure used for boiler and cleaning system: 3Mpa,2Mpa,0.7Mpa,0.4Mpa (4 kinds pressure)      
Reuse water condition: COD<=600  BOD<=240      SS<=80        ºC20-38   PH6-8

1. Power supply parameter voltage:380/220V±10%

Controlling system voltage: 220/24V,
Frequency: 50HZ±2

1. Working steam pressure for dryer cylinder<=0.5Mpa
2. Compressed air

Air source pressure: 0.6~0.7Mpa,  Working pressure:≤0.5Mpa
Requirements: Filtering,degreasing,dewatering,dry air supply temperature:≤35ºC

Production Line Equipment Introduction

3.1 Single Wire Paper Machine Main structure

No	Device name	Description	Qty	Unit
1	Wire section	(one layer wire) Wire length 15m,      Open type head box: 1set. equipped with chest roll, vacuum couch roll, wire driving roll, all dehydration element.	1	set
2	Press section	K press: Ø850mm/800mm/800mm×3000mm Ordinary press: Ø950mm/900mm×3000mm	1	set
3	Drying section	Ø1500mm×3000mm dryer cylinder 22sets, 15/16# Dryer chrome plating treatment, dry felt device and pneumatic pressure device, doctor 22sets, semi-close dryer hood two group	22	set
4	Sizing press section	Sizing press (Ø700mm/700mm×3000mm),  1set	1	set
5	Calender	Two roll calender (Ø500mm/500mm×2900mm),  1set	1	set
6	Pope reel section	Ø1100mm Horizontal pneumatic pope reel machine,  1set	1	set
7	Rewinding section	Frame rewinder,  1set	1	set
8	Mechanical transmission		1	set
9	Basic section		1	set
10	Electrical control system		1	set
11	Auxiliary equipment	Steam condensate recovery system, Vacuum system, Pneumatic system, Starch preparation system, Forming wire & Felt	1	set
12	QCS Electronic online monitoring auxiliary system	Moisture, gram weight, on-line monitoring infrared type	1	set